KIT- 2020+ Ford PIU Pedestal Kit with 7160-0928 | 7170-0814-02
Mount and position your computer with ease with our ALL-NEW 2020+ Ford Police Interceptor® Utility and 2020+ Ford Explorer pedestal kit with 9" locking slide arm (short clevis).
KIT COMPONENTS
- Vehicle Base (Item No. 7160-1336)
Vehicle Base attaches to the passenger side seat studs. Designed using heavy gauge steel for long-term durability. - Upper Pole (Item No. 7160-0178)
Center Upper Pole allows for closer mounting to the dash and less stress on the vehicle mounting equipment as weight is centered on the pole. Wrench is needed for loosening, tightening or height adjustment. - Lower Tube (Item No. DS-LOWER-9)
The Lower Tube provides vertical clearance over the center console or the seat. - Support Brace (Item No. 7160-0230)
Support Brace provides additional mount system support in rugged driving conditions and reduces mounting system vibration. 9-Inch Locking Slide Arm - Mongoose® (Item No. 7160-0220) Locking Slide Arm can rotate around 360° with locking points every 15°. Slide Arm can extend out from 9” to 13” from center pole and locks automatically in the retracted 9” position. Motion Attachment has tilt capabilities up to 90° forward/26° backward and can be swiveled up to 360°. Motion Attachment works with VESA 75mm, Gamber-Johnson 2x4, NEC or AMPS hole patterns. - 9-Inch Locking Slide Arm - Mongoose® (Item No. 7160-0928)
Locking Slide Arm can rotate around 360° with locking points every 15°. Slide Arm can extend out from 9" to 13" from center pole and locks automatically in the retracted 9” position. Motion Attachment has tilt capabilities up to 45° forward and can be swiveled up to 360°. Motion Attachment works with VESA 75mm, Gamber-Johnson 2x4, NEC or AMPS hole patterns.
WARRANTY: LIMITED LIFETIME
- A limited lifetime warranty is against manufacturer defects, not normal wear and tear.
